REVACIO®SPF is a excellent thermo forming film which exhibits superior transparency, excellent of easy peel, gloss, forming processability, forming depth, it contains special pa(nylon) layer,so very strong with soft film
REVACIO®SPF thermo forming films has been in the making under 60um~250um of thickness because it contains special pa(nylon) layer, enough to use dept forming with high barrier condition in cold temperature with high humidity as refrigerator or ice box, contrary to most of the barrier film will decrease barrier properties cold temperature with high humidity.
REVACIO®SPF films does not use harmful substance in all layer only use approved raw material by FDA, EU, JAPAN., ect.
1. Film Width and Thickness
• Width: 150mm~920mm (EPL, NON-EPL)
• Thickness: 30um~280um
• Standard: 120um
2. Application For REVACIO®SPF
• Easy spoil food: nature salmon, nature mackerel, nature pork, seasoned raw meat,
• beef sirloin, beef tenderloin, other high value food. etc.
• Self life period: extend 3~6 times than normal thermo forming film
Please refer to photo
*(Cheese bar thermoforming picture/bottom film)
*(Cheese bar thermoforming picture/top film)
3. The most important characteristics of REVACIO®SPF
• Superior of transparency, elongation, easy peel, heat stability, gloss, forming processability.
• Excellent forming depth
• Excellent oxygen and water vapor barrier function
• Work at low temperature in thermo forming machine
• Seal strength won't come off in cold temperature, for example refrigerator, ice box
• Approved using microwave oven by Food Compliance (direct food compliance), including U.S.A., EU, Japan ect.
4. REVACIO®SPF FORMING FILM TEST DATA (our existing film)
** our existing film(120um)
Product code | SPF120EPL(120um) | NEP120EPL(120um) | NAP120EPL(120um) | SPF120NON(120um) |
Forming dept | ★★★★★ | ★★★ | ★★★ | ★★★★★ |
Transparent | ★★★★ | ★★ | ★★ | ★★★★★ |
Productivity | ★★★★★ | ★★★★ | ★★★ | ★★★★★ |
Self life in cold | ★★★★★ | ★★★ | ★ | ★★★★★ |
Gloss | ★★★★★ | ★★★ | ★★★ | ★★★★★ |
|
|
|
|
|
*NAP : normal PA6 or PA66
*NEP: mormal PA6 or PA66 layer and EVOH layer
*EPL: easy peel seal
*NON: non easy peel
★★★★★ Superior
★★★★★ Excellent
★★★★★ Good
★★★★★ Fair
★★★★★ Poor
5. Film Test Report(standard 120um/23℃, 50% RH)
(1) Thickness Ave 120.75um
(um) Limit 118um~122um
(2) Tensile Strength MD 46.25
(Mpa) TD 42.50
(3) Elongation MD 586.40
at Break(%) TD 624.02
(4) Haze(%) 1.22
(5) OTR(cc-mil/100in²/24h) 0.52
0℃ / 95RH
(6) WTR(g-mil/100in²/24h) 1.92
38℃ / 90RH
